Monthly Archives: September 2016

7 Ways To Build Your Dream Home Without Losing A Limb

Building a house is an exciting prospect. Some aspects of building a house can be handled by relative novices, whilst other aspects of the project need to be handled by a professional building firm. It is important to remember that building a house from scratch has some inherent dangers.

The cheapest house and land packages in Perth are designed so that all the building work is handled by a professional firm.

Follow this helpful safety guide to ensure that building a dream house doesn’t result in injury or death.

Wear Protective Gear At All Times

It is vital to wear protective gear at all times when inspecting the house or helping out with construction. The entire body should be protected with clothing sourced from a reputable supplier: hard hats will protect heads from falling objects, whilst steel-capped boots will protect the feet from being injured if heavy or sharp objects happen to land on them. Invest in some padded gloves so that equipped can be gripped properly without cuts or blisters forming. Budget house and land packages by Pottier Homes ensure that homeowners won’t need to be involved in the building process – so no protective gear will be required.

Hire A Reputable Building Firm

Hiring a reputable building firm is incredibly important for the success of the project. This will also ensure that the homeowners are kept safe during the building process and also once the house has been completed. Shop around in order to find a firm that prioritises safety as well as quality.

Handle Power Tools With Extreme Caution

Power tools such as drills and saws will help people to complete their dream homes at a faster rate than using manual tools. These tools should only be handled by people who feel confident using them. Never use power tools that have become damaged because they could malfunction whilst they are turned on.

Leave Roof Tiling To The Professionals

Working on the roof should be left to a professional company who will be able to carry out the work safely. Never attempt to inspect the roof without wearing a proper safety harness, and make sure that the scaffolding is completely secure.

Ensure That All Ladders And Scaffolds Are Secure

Falls from ladders and scaffolding are one of the most common ways that people injure themselves when they are painting walls or drilling holes. Make sure that ladders are secure and that scaffolding has been installed properly. Quality safety harnesses can be purchased for reasonable prices. Damaged ladders and scaffolding should be replaced as soon as possible.

Leave Electrical Work To The Professionals

Wiring the house is a demanding job which can be risky for people who don’t have the right level of expertise. Accidents could lead to serious electric shocks or fires. Hire a qualified firm of electricians to wire the house and fit the lights.

Wear Protective Masks When Painting Walls Or Working In A Dusty Environment

Whilst paint, dust and other liquids won’t cause people to lose a limb, these materials can be harmful if their fumes are breathed in. Always wear a protective mask when painting walls or working in a dusty environment, because this will prevent damaging particles from entering the lungs and causing serious health effects.

Follow this guide in order to build a house safely.


In What Ways Does Anodising Benefit you?

This innovative technique has been used in the construction industry for a few decades now, patient and is popular in the extreme climates of Australia. Anodising is an electrolytic passivation process that increases the exterior layer of the natural oxide layer that forms on the surface. The word “anodise” is used because the part that is being treated is used as the anode to create an electrical circuit.  Apart from making the surface very resistant to corrosion, it also primes the surface for a better adhesion to paint or glue applications. Here are some of the benefits of anodised aluminium surfaces.

  • Maintenance free – Anodised aluminium is not treated with a coating of any kind, rather it is created as a result of the electrochemical process, and the finished product is durable, and can withstand the extremes of the Australian climate. It is recommended to give the surfaces a steam wash once a year, but other than that, it’s a question of fix it and forget it. Maintenance and repair tasks are part of every business, yet anodised surfaces mean less work, and that has to be a good thing. If a person is looking for Anodisers in WA, there are online suppliers who can produce to the customer’s specifications.

  • Aesthetic value – Modern anodised aluminium comes in a range of exciting colours, with metallic and bronzes very popular, but whatever the desired shade, a reputable supplier would be able to match that. Modern industry is more focused on image and aesthetics, so it is important to have a range of colours and finishes to ensure the right ambience. Many public buildings are covered with anodised aluminium, as it can enhance the character of the structure. Golds, bronzes, and tans provide that sleek, modern look that is the current trend, and it is a more eco-friendly process than powder coating, which is another plus for anodised aluminium.

  • The perfect primer – Anodised aluminium gives the surface more adhesion, ideal for applying paint or glues for cladding, so it is often used with an extra coating in mind. The surface offers high UV protection, and will not fade over time, making it ideal for warehousing, factories, and even office structures. One might not be aware as one moves around the city, but there are many structures that incorporate anodised surfaces, and with the extensive colour range, it is easy to create the desired look. There’s more information about anodising at with information about specifications and the process itself.

  • Durability cannot be matched, and with a thickness of 25 microns, it can handle anything the WA weather than conjure up. The surface has been modified by an electrochemical process, and with precision technology, any specifications can be consistently achieved. Thicknesses range from 15 microns, for a mild climate like the outback, to 25 microns, which is suited to the salty air in Western Australia, and provides adequate protection against all of the elements.

Having decided that anodised surfaces are the way to go, make sure the supplier is established in the industry, and with their expert guidance, the final finish will be an asset to the company in more ways than one.

Things to Do in a Plumbing Emergency

When something goes wrong in the home or office, sick especially if it’s a plumbing emergency, nurse don’t leave things to chance. Get expert help as soon as possible. Here’s a list of things to do in an emergency:-

  1. If there’s a leak anywhere turn the water off. A small leak is just as bad as something big going wrong with the plumbing. If left unrepaired, clinic it could cause a lot of damage, not a pleasant thought!
  2. Find out the extent of any water damage before calling a professional plumber. The way information is provided will give a plumbing expert an idea of the problem which in turn makes it a lot easier to fix.
  3. If it’s an issue with the main water line or sewers, don’t hesitate to telephone the water company.  They might even send a plumber to fix the problem straight away.
  4. Always have the number of a 24 hour emergency plumbing service handy. Ask how much the cost will be and get a general idea of how long the job will take.

There are lots of plumbing companies that advertise via the net. However Diamond Plumbing & Gas specialists can sort any plumbing problems out quickly. If a plumber or gas fitter is needed, make contact with specialists who will call as soon as possible.

Have peace of mind in a plumbing emergency

It’s not a pleasant sight, seeing water gushing out of a pipe, indoors or outdoors. For high quality workmanship, value for money and a fast repair job, online plumbing and gas tradesmen are the people to call on. Have peace of mind knowing repairs will be undertaken whether it’s a:-

  1. Blocked drain
  2. A leak in the roof
  3. A broken water pipe in the kitchen
  4. Under floor pipe problems

Certified plumbers can also help to install new kitchen appliances like gas stoves or install central heating systems. Whatever plumbing or gas problems a household is experiencing leading plumbing firms offer a wide range of services.

Friendly service guaranteed

Expect a truly friendly service from plumbers who have many years of experience. Sometimes when an emergency crops up there’s no time to waste. This is where Diamond Plumbing & Gas personnel come to the rescue. A team of fully qualified plumbers provide:-

  1. Same day turnaround
  2. A fast response no matter what the plumbing emergency is
  3. A high quality outcome
  4. Cost-effective services for domestic, real estate, strata clientele, commercial and industrial customers

Expect a plumbing emergency to be resolved on time every time by dedicated plumbers. There are no hidden charges and what’s even better, a six year guarantee on all workmanship is provided.

To get in touch

Got a plumbing emergency then get in touch with reputable plumbers. Make a quick phone call, send a fax or email and say what the plumbing problem is. Alternatively complete an online form with the relevant details and a short message.

Caring for a Backup Generator

Backup generators are a boon to people who reside in areas that are prone to power outages. With a dependable generator, price being deprived of electricity no longer has to be a concern for your household. However, pills to ensure a consistently reliable performance from your generator, you’ll need to properly care for it. Luckily, keeping a backup generator in prime condition is far from difficult, particularly if you enlist the services of seasoned pros. In the interest of preserving your generator for as long as possible, heed the following maintenance tips.

Be Consistent With Oil Changes

Many backup generators are similar in both design and function to automobiles. However, as you’ll find, a generator requires oil changes far more frequently. For this reason, it’s recommended that you keep a steady supply of oil and filters on hand. A sizable number of brand new generators need their first oil change after 25 hours of continuous use. After that, old oil will need to be disposed of and new oil will need to be applied every 50 to 60 hours. So if your area is frequently affected by days-long outages, take care to stock up on the appropriate type of oil.

Have Your Generator Inspected Every Six Months

Most people take their vehicles in for an oil change every six months – which is also as often as they should have their backup generators thoroughly inspected. When looking for the right people to inspect your generator, keep an eye out for experienced companies like Grasten Power Technologies, the foremost authority on generator repairs Houston TX. After having a look at your generator, a seasoned technician will be able to identify any existing defects or prospective problems and recommend the appropriate course of action.

Avoid Back-Feeding at all Costs

In addition to damaging your generator’s internal components, back-feeding can prove fatal. This dangerous practice entails using a dual male-ended extension cord to back-feed a generator’s power into a house’s wiring system. Each year, homeowners, neighbors and linemen are killed as a result of back-feeding, which is why it should be avoided at all costs. Having an electrician install a transfer switch is the safest alternative to back-feeding. Despite being a little most costly, going this route will go a long way in preserving both your generator and your personal safety.

A backup generator is a sound investment for any household that frequently loses power. It’s important to note, however, that these devices are not self-sustaining and will require semi-regular maintenance. By staying current with oil changes, committing to regular inspections and avoiding back-feeding, you can keep your generator up and running for years to come.